The Way To Repair A Punctured Bike Inner Tube

Submitted by: Jay Gaskey

Why Is My Bike Becoming Harder To Pedal

You might be cycling along your favourite trail pondering only what could be around that next bend when it occurs. You hear what sounds like a gunshot going off after which it begins to become truly tough to pedal. You find out exactly where the noise came from and sure enough you now have yourself a flat tire. This was your 1st punctured tire that you had to put your bike repair knowledge to work with. It s time for you to find out the best way to properly repair that flat inner tube in order that you may get riding once more. You can continue reading to understand more about bike servicing. There are really so many details to know about how a bike works and exactly how a person will be able to fix or repair it anytime you get yourself into a breakdown condition.

The Best Way to Fix That Flat Tire – Enter the Patch Kit

You check your seat bag and you are in luck since you’ve a patch kit. Let s walk through the methods on fixing your punctured inner tube instead of just exchanging it. Most people will generally just get rid of their old inner tube, toss it in to the rubbish and replace it with a new one. The majority of the time though, your previous inner tube remains completely useable and patching it will save you the price of having to buy a new one.

YouTube Preview Image

Initial Steps First- Tire Has to be Taken off

Initial order of business is to get your wheel off the bike because you’ll need to also remove your rubber tire along with your deflated inner tube. Now that your inner tube is off, take a close look at it and locate the hole. A terrific method to do this will be to blow up the tire so that it holds a tiny amount of air. This makes it possible for the tube to start leaking once again. The air in the tube will obviously cause the tube to begin to leak again. Putting your inner tube into water will allow you to see bubbles leaking from the hole. Source of your leak has been located so let s now get the hole patched.

Opportunity to Glue

Looking into your tire repair kit, you notice that the contents not only include patches and glue but also a tiny piece of sand paper. Before you are able to make use of the glue, you will need to do a tiny bit of sanding about the hole in your tube. You’ll be able to now get the glue out and open up the tube. Place glue onto your inner tube and spread it all-around to ensure that your patch will be prepared to stick. Just before you can spot your patch on your tube, you will need to initially let the glue dry. This isn t necessarily intuitive but yes, you’ll need to let the glue dry before you position your patch over the hole.

Glue Is Dry What’s Next?

Get hold of a patch and press it down firmly over the hole ensuring that there are no air bubbles left underneath. The glue may possibly feel too dry to bond with the patch but do not worry it is going to stick just fine.

You’re Off – Once Again

All it takes are these couple of quick steps to re-seal your tube. Time to insert your inner tube and tire back onto your wheel rim. It truly is normally a great strategy though just before the inner tube and tire gets put back onto the bicycle, to make sure that what ever caused you the flat in the 1st place is no longer there. With your tire and inner tube back in place, all that’s left is to pump it back up to regular riding pressures (located on the sidewall of the tire). You can get more info at website: Never get caught with another bike break down ever again. The only thing left to do now is to just return to your bike and think about where it is you wish to ride next.

About the Author: To learn more about me you can visit my site

.To discover a lot more you can visit my web address

. We all are bike riders who love to cycle and additionally really like to tinker on our bikes. It’s absolutely our passion.


Permanent Link: